tai-saw technology co., ltd. fr-71s03-01 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com approval sheet for product specification issued date: march, 7, 2005 product name: saw filter 930.5 mhz for pager tst parts no.:TA930GC customer parts no.: checked by: bob chau approval by: francis chen date: 3, 7, 2005 company: division: approved by : date:
tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com saw filter 930.5 mhz for pager model no.: TA930GC rev. no.:4 a. maximum rating: 1.input power level: 0 db m 2.dc voltage: 10 v 3.operating temperature: -30 c to +70 c 4.storage temperature: -40 c to +85 c b. electrical characteristics: characteristics specification note center frequency f c (mhz) 930.5 1 i.l. (928.5~ 932.5 mhz) (db) 4.5 max. ripple (928.5 ~ 932.5 mhz) (db) 2.0 max. 1 attenuation:( reference level from 0 db) 1) 400 ~ 880 mhz (db) 35 min. 1 2) 884.8 ~ 890.2 mhz (db) 40 min. 1 3) 906.8 ~ 911.2 mhz (db) 30 min. 1 4) 980 ~ 1300 mhz (db) 35 min. 1 impedance at f c : input impedance 50-j57ohm 2 output impedance 50-j57ohm 2 note1. the standard definitions is in jis c 6703 note2. z in =50-j57ohm z out =50-j57ohm source impedance 50 ? load impedance 50 ? rohs compliant lead free lead-free soldering
tai-saw technology co., ltd. 3 tst dcc release document c. frequency characteristics: TA930GC -70 -60 -50 -40 -30 -20 -10 0 830.5 850.5 870.5 890.5 910.5 930.5 950.5 970.5 990.5 1010.5 1030.5 freq.(mhz) att.(db) TA930GC -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 915 917 919 921 923 925 927 929 931 933 935 937 939 941 943 freq.(mhz) att.(db)
tai-saw technology co., ltd. 4 tst dcc release document d. measurement circuit: 50? hp network analyzer 50? saw filter 10nh 10nh b e a,c,d,f e.outline drawing: t
tai-saw technology co., ltd. 5 tst dcc release document f. pcb footprint :
tai-saw technology co., ltd. 6 tst dcc release document g. packing: 1. reel dimension 2. tape dimension 930 t g direction of feed
|
